Gegenwärtiger Verschleißprüfer

The reciprocating abrasion testing machine is used to test the abrasion resistance of materials such as coatings, plastics, decorative fabrics, automotive interiors, and pile fabrics.  It is widely used in product quality control, new product development and performance verification, and testing laboratories. This testing equipment is independently developed and manufactured by Shanghai Qianshi Precision Electromechanical Technology Co., Ltd., offering high cost-effectiveness and comprehensive after-sales service.

Anwendungen

Bewertung der Verschleißbeständigkeit wichtiger mechanischer Komponenten wie Motorkolben, Getriebe und Lager. Vorhersagen ihrer Lebensdauer und Leistung im tatsächlichen Gebrauch, Unterstützung bei der Optimierung mechanischer Konstruktionen und Verbesserung der Produktzuverlässigkeit und Haltbarkeit.

Normen

ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils.

ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests.

National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc.

Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved.

These standards are developed according to the testing requirements for specific materials or application areas.

Eigenschaften

The reciprocating wear tester is particularly suitable for testing flat surfaces. With optional accessories, the reciprocating wear tester can be configured to evaluate the relative resistance or sensitivity of material surfaces to physical damage such as abrasion, scratching, gouging, friction, scuffing, and rubbing.

Parameter

Accessoriess

Standard accessories: Weights, friction rods, wear testing kit

Test Procedures

1. Before starting the machine, ensure it is placed on a level surface and that the test platform is clean;

2. Install the specified type of friction head or other friction tool, and adjust the test rod according to the height of the sample;

3. Place the specified weight on the friction rod;

4. Place the sample to be tested on the test platform and clamp it securely;

5. Before testing, set the number of cycles and speed. Press the menu button, enter the menu, select and set the speed, press "ENTER" to confirm, and then press "START" to begin the test;

6. After the test is completed, the instrument will stop automatically. Remove the sample and inspect it or perform other tests;

7. Turn off the power and clean the sample platform.