Features and Benefits1. The water-sealed structure is adopted, and the sealing performance betw
WhatsApp: +86 13816217984
E-Mail :info@qinsun-lab.com
1. The water-sealed structure is adopted, and the sealing performance between the chamber cover and the chamber is excellent, effectively preventing the salt spray from spilling.
2. Salt spray corrosion test chamber can accurately control temperature,salt spray concentration, and is monitored and controlled by the microprocessor control system.
3. Tower spray method, nozzle design and distribution can make the salt spray evenly sprayed on the test sample, simulate the real marine environment or other corrosive environment.
4.The whole chamber body material adopts glass fiber reinforced plastics and is one-time forming.Strong corrosion resistance,reinforced design, long service life and high temperature resistance.
①Workroom |
Standard:round rod and V-shaped groove design, test pieces can be freely placed and adjusted angles.
|
②Spray tower |
|
③Heater strip | Heat the air in the test chamber to meet the temperature conditions required for the test. Fast heating speed and uniform temperature. |
④Saturated barrel | For humidifying and preheating the air entering the spray system, so that the air reaches a saturated state to keep the temperature and humidity of the salt spray stable. |
⑤Controller | The user can set the test temperature, humidity, spray time and other parameters through the control system, and monitor the data during the test in real time. |
⑥Salt solution tank | Built-in 30 liter salt solution tank with a brine mixing system to keep the brine even. S-010.S-016.S-020 equipped with an external salt tank. |
⑦Air supply(Option) | The compressed air produced by the air compressor is filtered, reduced pressure, and purified before entering the spray system. The role of the compressed air is to blow salt water out of the nozzle, forming a salt spray. |
Modell | STD S-150 | STD S-250 | STD S-750 | STD S-010 |
Internal dimensions (mm) | 590*470*400 | 1000*640*500 | 1100*750*500 | 1000*1300*600 |
Overall dimensions (mm) | 1460*760*1140 | 1850*960*1350 | 1950*1030*1350 | 2000×1300×1600 |
Interior Volume (L) | 110 | 320 | 410 | 780 |
Temperature Range | Ambient ～ +60 ℃ | |||
Temperature Fluctuation | ± 0.5 ℃ | |||
Temperature Deviation | ± 2.0 ℃ | |||
Humidity Range | 95% ~ 98% RH | |||
Salt Fog Deposition | 1～2ml / 80cm2 · h | |||
Spray Type | Continuous / Periodic | |||
Salt Fog Collected | Fog collector and fog measure cylinder | |||
Air Preheating | Saturated air barrel | |||
Spraying System | Atomizer tower and Spray nozzles | |||
Controller | PID controller | |||
Safety Device | Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection | |||
Material | Glass fiber reinforced plastics | |||
Standard Configuration | 6 round bars and 5 V-shaped grooves | |||
Haftungsausschluss: Die oben genannten Inhalte dienen ausschließlich zur Referenz und Kommunikation zwischen Brancheninsidern und garantieren ihre Genauigkeit oder Vollständigkeit nicht. Gemäß den einschlägigen Gesetzen und Vorschriften und den Vorschriften dieser Website sollten Einheiten oder Einzelpersonen, die verwandte Gegenstände kaufen, gültige Qualifikationen und Qualifikationsbedingungen erhalten.
Unternehmen Telefon
+86-21-6420 0566
Arbeitszeiten
Montag bis Freitag
Handy:
13816217984
Email:
info@qinsun-lab.com
