KES - NDG5 Puncture Strength Tester
Compliance StandardsASTM D638 (Plastics Tensile Properties)ISO 13934-1 (Textile Tensile Strengt
E-Mail-Adresse: info@standard-groups.com
Inhalt
Compliance Standards
- ASTM D638 (Plastics Tensile Properties)
- ISO 13934-1 (Textile Tensile Strength)
- SAE J2749 (Automotive Composite Testing)
- JIS L1096 (Fabric Shear Resistance)
- IEC 62133-2 (Battery Cell Shear Testing)
Technical Parameters
| Parameter | Spezifikation |
|---|
| Force Range | 0.01N - 500N (±0.5%) |
| Displacement Resolution | 0.1μm |
| Test Speed | 0.01 - 1000 mm/min |
| Shear Strain Range | ±8° (±0.1° accuracy) |
| Grip Types | Mechanical, Pneumatic, Cryogenic |
| Data Rate | 1000 Hz sampling |
Hauptmerkmale
- Biaxial load cell (tension + shear)
- Real-time stress-strain curve display
- Non-contact laser extensometer
- Automated grip pressure control
- ISO 17025-compliant calibration
Test Capabilities
| Test Type | Standard | Parameters |
|---|
| Ultimate Tensile Strength | ASTM D638 | 50 mm/min |
| Shear Modulus | ISO 14129 | ±5° shear angle |
| Cyclic Fatigue | SAE J2749 | 10⁶ cycles @ 5Hz |
Measurement System
- 24-bit digital load cell
- 0.1μm laser displacement sensor
- Thermal compensation (-10°C to 50°C)
- Real-time Poisson's ratio calculation
Standard Configuration
- Dual-column frame (500mm test space)
- Interchangeable grips (wedge, roller, shear)
- TestXpert II analysis software
- 500N load cell (Class 0.5)
Automotive Options
- Battery cell shear strength fixture
- -40°C to 150°C thermal chamber
- Seatbelt webbing test package
- CAN bus data integration
Safety Systems
- Emergency stop with position lock
- Overload protection (110% F.S.)
- Automatic grip release on failure
- Safety interlock on chamber door
Implementation Notes
- Calibrate monthly per ISO 376
- Sample alignment critical for ±1% accuracy
- Ambient vibration must be <4μm RMS
- Use Class M1 reference weights
Haftungsausschluss: Die oben genannten Inhalte dienen ausschließlich zur Referenz und Kommunikation zwischen Brancheninsidern und garantieren ihre Genauigkeit oder Vollständigkeit nicht. Gemäß den einschlägigen Gesetzen und Vorschriften und den Vorschriften dieser Website sollten Einheiten oder Einzelpersonen, die verwandte Gegenstände kaufen, gültige Qualifikationen und Qualifikationsbedingungen erhalten.
