Fast thermal conductivity tester

Fast tester measures non-metal solid thermal conductivity.

E-Mail-Adresse: info@standard-groups.com

Fast Thermal Conductivity Tester (Composite Conductive Thermal Tester) mainly used for the determination of non-metallic solid material thermal conductivity, suitable for testing units, universities, research and production units to use.

 

Standards Compliant:
GB 10297-1998, GB / T10294-2008, GB / T10801.1, GB / T10801.2

 

Main Parameters:

1. Power supply: AC220V ± 10%, 50Hz
2. Temperature range: (0-80) ℃
3. Temperature resolution: 0.01 ℃
4. Temperature measurement accuracy: 0.1 ℃
5. Thermal conductivity measurement range: ≤ 2W / (m · K)
6. Measurement error: ± 5%
7. Maximum measurement time: 300s
8. Laboratory temperature: (23 ± 2) ° C
9. Laboratory humidity: (40-60%) RH

  

Main features:
1. Measurement time is short: the measurement process, the specimen material denatured, deformation is small, the measured value closer to the true value;
2. Easy to operate: all the use of microcomputer intelligent control, the operator without special training, you can directly post operation;
3. Wide test range: the basic effective coverage of non-metallic materials and low thermal conductivity of the metal material;
4. Widely used: widely used in construction, energy, environmental protection, chemical, medical, energy and other industries.

 

Haftungsausschluss: Die oben genannten Inhalte dienen ausschließlich zur Referenz und Kommunikation zwischen Brancheninsidern und garantieren ihre Genauigkeit oder Vollständigkeit nicht. Gemäß den einschlägigen Gesetzen und Vorschriften und den Vorschriften dieser Website sollten Einheiten oder Einzelpersonen, die verwandte Gegenstände kaufen, gültige Qualifikationen und Qualifikationsbedingungen erhalten.