Programmable Water Cooled Thermal Shock Test Chamber With Touch Panel Control

Detailed Product Description

Product introduction

Thermal shock test chamber is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.

The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.

High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.

Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.

Both 2 zone and 3 zone shocks can be chosen.

All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.

Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.

Machine can be shut down automatically in case of electrical power instabilities.

Technische Parameter

Simulated load ic 5.0kg

HT IN-Zone subzero 65.00°C~above freezing 150.00°C/5min

LT IN-Zone above freezing 150.00°C subzero 65.00°C

Preheating time: 45MIN

Pre-cooling time: 75MIN

Senor: T×4

Setting range: Temperature: subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999

Resolution: Temperature:0.1°C

Output mode: PID and SSR(control method)

Power(K.W) 23