DescriptionThe TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chambe
WhatsApp: +86 13816217984
E-Mail :info@qinsun-lab.com
The STD-TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chamber. A motor driven test spindle, in the form of standard rotary feedthrough, projects downwards into the chamber and carries tooling for mounting rotating test samples. A servo motor with encoder feedback provides a variable speed turn-down ratio of 100:1.
| Tribometer | |
| Load: | 20 to 2000 N |
| Rotational Speed: | 10 to 1700 rpm |
| Maximum Friction Torque: | 5 Nm |
| Load Actuation: | Pneumatic Bellows |
| Test Configurations: | Four ball wear (ASTM D2266) |
| Thrust washer (ASTM D3702) | |
| Three pin on disc (ASTM G99) | |
| Spiral orbit ball on disc (ASTM F2661) | |
| Motor Type: | Servo with encoder feedback |
| Roughing Pump: | Rotary vane pump |
| Vacuum Pump: | Turbomolecular |
| Interface: | Serial Link Interface Module |
| Software: | COMPEND 2000 |
| Test Chamber | |
| Vacuum: | Down to 100 Picobar (10-5 Pa) |
| Environment: | Air, inert gas or vacuum |
| Material: | 304 stainless steel |
| Surface Treatment: | Glass bead blasted |
| Viewports: | Fused Silica |
| Electrical Feedthrough: | 1 kVolts , 15 Ampere |
| Coaxial Feedthrough: | BNC through Flange |
| Thermocouple: | Type K through Flange |
| Vacuum Transducer: | Cold Cathode and Pirani |
| Leak rate: | < 10-7 mbar l/s |
| Rotary Feedthrough: | Pressure up to 10-7 Pa |
| Rotary Feedthrough: | Temperature up to 80ºC |
| Computer Controlled Parameters | Rotational Speed |
| Test Duration | |
| Load | |
| Manually Controlled Parameters | Operating Pressure |
| Recorded Parameters – Sliding Friction & Wear | Load |
| Rotational Speed | |
| Friction Torque | |
| Temperature | |
| Operating Pressure | |
| Electrical Contact Potential | |
| Number of Revolutions | |
| Test Duration | |
| Sliding Speed | |
| Sliding Distance | |
| Recorded Parameters – Rolling Contact Fatigue | Load |
| Rotational Speed | |
| Scrub Force | |
| Temperature | |
| Operating Pressure | |
| Electrical Contact Potential | |
| Number of Revolutions | |
| Number of Ball Orbits | |
| Test Duration | |
| Services | |
| Electricity: | 220/240V, single phase, 50 Hz, 3 kW |
| 110/120 V, single phase, 60 Hz, 3 kW |
Haftungsausschluss: Die oben genannten Inhalte dienen ausschließlich zur Referenz und Kommunikation zwischen Brancheninsidern und garantieren ihre Genauigkeit oder Vollständigkeit nicht. Gemäß den einschlägigen Gesetzen und Vorschriften und den Vorschriften dieser Website sollten Einheiten oder Einzelpersonen, die verwandte Gegenstände kaufen, gültige Qualifikationen und Qualifikationsbedingungen erhalten.
Unternehmen Telefon
+86-21-6420 0566
Arbeitszeiten
Montag bis Freitag
Handy:
13816217984
Email:
info@qinsun-lab.com
