DescriptionThe rig is constructed with similar geometry to a conventional lathe, comprising a “
WhatsApp: +86 13816217984
E-Mail :info@qinsun-lab.com
The rig is constructed with similar geometry to a conventional lathe, comprising a “head-stock”, for carrying shaft samples, a “tail-stock”, mounting a combined axial force and radial torque transducer, and a “tool-post”, for mounting a specimen and applying a radial force.
The head-stock and tail-stock assemblies are mounted on standard linear slide, on bearing blocks, with manual clamps.
| Maximum Radial Load: | 5 kN |
| Bearing/Shaft Diameter: | 5 to 30 mm |
| Spindle Taper: | DIN 69871A, taper ISO 50 |
| Rotary Motion: | |
| Speed: | 0 to 2000 rpm |
| Continuous Torque: | 56.4 Nm |
| Peak Torque: | 136 Nm |
| Oscillating Motion: | |
| Amplitude: | Variable 0 to +/-20° |
| Frequency: | 0.001 to 1 Hz |
| Axial Motion: | |
| Maximum Thrust: | 5 kN |
| Stroke: | 0 to 30 mm |
| Frequency: | 0.001 to 1 Hz |
| Air Bearing: | |
| Input Pressure | 0.41 MPa |
| Ideal Load at 5um Fly Height | 6672 N |
| Stiffness | 1009 N/μm |
| Flow | 4.96 NLPM |
| Fly Height | 5 microns |
| Porous Media Material | Carbon |
| Viable Pressure Range | 0.414 – 0.552 MPa |
| Maximum Allowable Pressure Supply | 0.689 MPa |
| Common Guide Surfaces | Hard-coated aluminium |
| Guide Surface Finish | 16 RMS |
| Controlled Parameters | Frequency (rotational, oscillatory, reciprocating) |
| Amplitude (oscillatory, reciprocating) | |
| Test Duration | |
| Load | |
| Measured Parameters | Frequency |
| Amplitude | |
| Load | |
| Friction Torque | |
| Axial Friction Force | |
| RMS Friction | |
| Contact Potential | |
| Services | |
| Electricity: | 380/415V, three phase plus neutral, 50/60 Hz, 20 kW |
| Air: | 4 cfm at 8 bar (120 psi) |
Haftungsausschluss: Die oben genannten Inhalte dienen ausschließlich zur Referenz und Kommunikation zwischen Brancheninsidern und garantieren ihre Genauigkeit oder Vollständigkeit nicht. Gemäß den einschlägigen Gesetzen und Vorschriften und den Vorschriften dieser Website sollten Einheiten oder Einzelpersonen, die verwandte Gegenstände kaufen, gültige Qualifikationen und Qualifikationsbedingungen erhalten.
Unternehmen Telefon
+86-21-6420 0566
Arbeitszeiten
Montag bis Freitag
Handy:
13816217984
Email:
info@qinsun-lab.com
